Vacuum forming, also known asthermoforming, vacuum pressure forming or vacuum molding, is a procedure in which a sheet of heated plastic material is shaped a certain way.
Automatic Plastic vacuum Forming Machine: Mainly for the production ofvariety plastic containers(egg tray,fruit container, package containers, etc) with thermoplastic sheets, such as PET, PS, PVC etc.
Human-computer interface with high definition contact-screen, which can monitor the operation situation of all parameter setting.
Model | Cylinder-HEY05A | Servo-HEY05B |
Working Station | Forming, Stacking | |
Applicable Material | PS, PET, PVC, ABS | |
Max. Forming Area (mm2) | 1350*760 | |
Min. Forming Area (mm2) | 700*460 | |
Max. Formed Depth (mm) | 130 | |
Sheet Width (mm) | 490~790 | |
Sheet Thickness (mm) | 0.2~1.2 | |
Accuracy of Sheet Transport (mm) | 0.15 | |
Max. Working Cycle (cycles/minute) | 30 | |
Stroke of Upper/Lower Mold (mm) | 250 | 350 |
Length of Upper/Lower Heater (mm) | 1500 | |
Max. Capacity of Vacuum Pump (m3/h) | 200 | |
Power Supply | 380V/50Hz 3 Phrase 4 Wire | |
Dimension (mm) | 4160*1800*2945 | |
Weight (T) | 4 | |
Heating Power(kw) | 86 | |
Power of Vacuum Pump (kw) | 4.5 | |
Power of Sheet Motor (kw) | 4.5 | |
Total Power(kw) | 100 | 120 |
PLC | DELTA | |
Touch Screen | MCGS | |
Servo Motor | DELTA | |
Asynchronous Motor | CHEEMING | |
Frequency Converter | DELIXI | |
Transducer | OMDHON | |
Heating Brick | TRIMBLE | |
AC Contactor | CHNT | |
Thermo Relay | CHNT | |
Intermediate Relay | CHNT | |
Solid-state Relay | CHNT | |
Solenoid Valve | AirTAC | |
Air Switch | CHNT | |
Air Cylinder | AirTAC | |
Pressure Regulating Valve | AirTAC | |
Grease Pump | BAOTN |